The first step to building a custom TV lift is to build the main structure of the closet and drawers. Depending on the design of the TV lift and the size of the cabinet, he will need to accommodate your specific TV model. It is important to join the first unit in order to make the necessary changes to the elevator TV.
Then a section of the elevator to meet the needs top up with the TV via a support to hold the top of the column pipe to the bottom of the upper cabinet. The hinged top is also an option, where one of the hinges on the upper back and opens as target = "_blank"> TV lifts out of cabinet. For a hinged top, attach a 2×4 inside the cabinet on both sides of the hinge connection.
The third step is the assembly of custom TV lift for the column within the cabinet with a robust support base. More high-end cabinets are often strong enough for this step and allow the base to remain in place.
The fourth step is the completion of the cabinet, adding drawer sides with finishing nails. Are also the option to include them behind the drawers to prevent any damage visible from the outside.
Finally, you need to mount the TV on your TV lift custom that can be completed through the use of tools such as Pop Up TV Lift Kit Put the power box inside the case and connect the cable to the TV lift column and then connected to the power box on the wall. Add a section of 2×4 with a rounded corner to the top of the column so that the lid may depend on properly. If necessary, place a piece of cardboard to the back side of the TV lift, to prevent the hinged lid to be caught as television enters the office.
About the Author:
Allison Guerrero is an interior designer who often uses tv lifts in her high end home designs.
Article Source: ArticlesBase.com – How to Build Your Own TV Lift
Plasma tv lift
|
|
E-Z TV Lift – Fireplace Model $895.00 Using the E-Z TV Lift Lift makes installation of these large, cumbersome TV’s a one person job and it also saves wear and tear on the body. I’s a real money and time saver. not to mention preventing damage to the TV during installation…. |
|
|
Wood Technology-WT-4041.570.072 ? Electronic Entertainment Lift $1,850.00 Unit raises and lowers by radio command remote and also includes a three way push switch. Supplied with 110 V-60Hz grounded transformer. Low-tension reduction gear motor of 24 V DC with continuous screw and electromechanical stop. Conceals TV, computer, stereo, etc. within cabinet…. |
|
|
Plasma & LCD Pop Up TV Lift with 36 stroke $950.00 Typically you match the TV lift by measuring the height of the TV and match it to the closes Stoke length of the TV Lift since this is the distance you want to lift the TV up…. |
